The first step in configuring a system for updates is to register with the Red Hat Network (RHN).
For mostsystems,this is done during the initial installation. Successfully registered systems will appear on the RHN web site.
If the system is not listed, run the Red Hat Network Registration tool, which can be found in the
Applications menu under System Tools
or on the command line:
# rhn_register
Follow the prompts on the screen. If successful, the system will appear on the RHN web site and be subscribed to one or more software update channels.
Additionally, a new daemon, rhnsd, will be enabled.

If the system will not have access to the Internet, it will not be able to directly subscribe to the RHN update repository.
Updates will have to be downloaded from the RHN web site manually. The command line tool yum and the graphical front-ends pirut and pup can be
configured to handle this situation.

You can follow the below 3 step for allow access or blocked site for specific IP in MikroTik Router
1– configure Web proxy on your Mikrotik. go to IP >>> firewall >>> NAT >>> clik on (+Sign) to add a NAT rule. in Chain: choose dstnat in Protocol choose 6 (tcp) in Dst.Port Write 80 then go to Action Tab in Action: Choose Redirect and in To Ports Write 8080
now you have done first step.

2– go to IP >>> Webproxy >>> clik on Webproxy Settings click on enable check box to enable Webproxy settings.

3– now block www.google.com go to IP >>> Webproxy >>>Access (From right panel) click on (+ sign).
from Dst.Host write www.google.com and in Action choose deny,then google will not be access. then in Redirect to write www.itjagat.com when the try to open www.google.com they automaticly would be redirected to www.itjagat.com.com
Continue reading

In this Tropic I will show how to create  Mikrotik router VPN / PPTP

Any Mikrotik router will work.
License of router does not matter for PPTP.
Lets Start –
1. Login to router using WINBOX.
2. Go to IP —>POOL.

3. Click the plus symbol to add a new entry.
4. you can assign any name this new pool whatever you like but to make it simple I use VPN-pool, and set Address to the range you want it to hand out, on this one were using the address range 192.168.1.1-192.168.1.254 to hand out the total range of Class C.
Hit Apply when done Continue reading

When management point site systems are configured in network load balancing (NLB) clusters in mixed mode sites, running the Internet Information Services (IIS) Web site application pool for the site system Web site using the local system account of the site system computer does not allow clients to authenticate the site system using Kerberos authentication. When site systems are configured in an NLB cluster, a domain user account must be configured to run the relevant IIS Web site application pools for the site systems.
Configuring a Service Principal Name (SPN) for management point site systems configured in network load balancing clusters is not required for sites operating in native mode. Continue reading

To automatically publish a service location resource record (SRV RR) in Domain Name System (DNS) for the default management point in a Configuration Manager 2007 site, follow the procedure below. Publishing to DNS requires a version of DNS running BIND 8.1.2 or higher, which is configured to allow automatic updates. Continue reading

System Center Configuration Manager 2007, System Center Configuration Manager 2007 R2, System Center Configuration Manager 2007 R3, System Center Configuration Manager 2007 SP1, System Center Configuration Manager 2007 SP2
This flow chart can be used to determine the Setup steps required to install a Configuration Manager 2007 console. Continue reading

ystem Center Configuration Manager 2007, System Center Configuration Manager 2007 R2, System Center Configuration Manager 2007 R3, System Center Configuration Manager 2007 SP1, System Center Configuration Manager 2007 SP2.
This flow chart can be used to determine the Setup steps required to install a Configuration Manager 2007 primary or secondary site that will operate in either native mode or mixed mode. Continue reading

Windows logo key+spacebar for Switch input language and keyboard layout.
Windows logo key+O for Locks device orientation.
Windows logo key+Y for Temporarily peeks at the desktop.
Windows logo key+V for Cycles through toasts.
Windows logo key+Shift+V for Cycles through toasts in reverse order.
Windows logo key+Enter for Launches Narrator.
Windows logo key+PgUp for Moves Metro style apps to the monitor on the left.
Windows logo key+PgDown for Moves Metro style apps to the monitor on the right.
Windows logo key+Shift+. for Moves the gutter to the left (snaps an application).
Windows logo key+. for Moves the gutter to the right (snaps an application)
Continue reading

1. The home screen, press the Windows key for open or switch to the desktop (if open).
2. Press the (Windows key + D) for open the Windows desktop.
3. Press the (Windows key +.) to fix and Windows apps unfreezing sideways on the screen.
4. Press the(Windows key + X) to the user menu is open, that access to many features that have most power users would like to (such as Device Manager and command prompt).
5. Press the (Windows key + C) for open the charm.
6. Press the (Windows key + I) found open the settings is the same settings in the charms.
7. Press and hold the (Windows key + tab), point to the open apps.
8. Press the (Windows key + print), is saved to create a screenshot, automatically in the My Pictures folder.

Page 10 of 23« First...89101112...20...Last »